Top image

Editorial board

Darius Andriukaitis
Kaunas University of Technology, Lithuania

Alexander Argyros
The University of Sydney, Australia

Radu Arsinte
Technical University of Cluj Napoca, Romania

Ivan Baronak
Slovak University of Technology, Slovakia

Khosrow Behbehani
The University of Texas at Arlington, United States

Mohamed El Hachemi Benbouzid
University of Brest, France

Dalibor Biolek
University of Defence, Czech Republic

Klara Capova
University of Zilina, Slovakia

Ray-Guang Cheng
National Taiwan University of Science and Technology, Taiwan, Province of China

Erik Chromy
UPC Broadband Slovakia, Slovakia

Milan Dado
University of Zilina, Slovakia

Petr Drexler
Brno University of Technology, Czech Republic

Eva Gescheidtova
Brno University of Technology, Czech Republic

Gokhan Hakki Ilk
Ankara University, Turkey

Janusz Jezewski
Institute of Medical Technology and Equipment, Poland

Rene Kalus
VSB - Technical University of Ostrava, Czech Republic

Ivan Kasik
Academy of Sciences of the Czech Republic, Czech Republic

Jan Kohout
University of Defence, Czech Republic

Ondrej Krejcar
University of Hradec Kralove, Czech Republic

Zbigniew Leonowicz
Wroclaw University of Science and Technology, Poland

Miroslaw Luft
Technical University of Radom, Poland

Stanislav Marchevsky
Technical University of Kosice, Slovakia

Jerzy Mikulski
University of Economics in Katowice, Katowice, Poland

Karol Molnar
Honeywell International, Czech Republic

Miloslav Ohlidal
Brno University of Technology, Czech Republic

Neeta Pandey
Delhi Technological University, India

Alex Noel Joseph Raj
Shantou University, China

Marek Penhaker
VSB - Technical University of Ostrava, Czech Republic

Wasiu Oyewole Popoola
The University of Edinburgh, United Kingdom

Roman Prokop
Tomas Bata University in Zlin, Czech Republic

Karol Rastocny
University of Zilina, Slovakia

Marie Richterova
University of Defence, Czech Republic

Gheorghe Sebestyen-Pal
Technical University of Cluj Napoca, Romania

Sergey Vladimirovich Serebriannikov
National Research University "MPEI", Russian Federation

Yuriy Shmaliy
Guanajuato University, Mexico

Vladimir Schejbal
University of Pardubice, Czech Republic

Bohumil Skala
University of West Bohemia in Plzen, Czech Republic

Lorand Szabo
Technical University of Cluj Napoca, Romania

Adam Szelag
Warsaw University of Technology, Poland

Ahmadreza Tabesh
Isfahan University of Technology, Iran, Islamic Republic Of

Mauro Tropea
DIMES Department of University of Calabria, Italy

Viktor Valouch
Academy of Sciences of the Czech Republic, Czech Republic

Jiri Vodrazka
Czech Technical University in Prague, Czech Republic

Miroslav Voznak
VSB - Technical University of Ostrava, Czech Republic

He Wen
Hunan University, China

Otakar Wilfert
Brno University of Technology, Czech Republic

Home Search Mail RSS

Foreword about Associate Professor Luciano Belandria, Associate Professor at the Department of Electronic Engineering, National Experimental University of Tachira (UNET), Venezuela:

" Today, electrical machines are increasingly used, both as generators and motors in electrical industrial drives, due to their simplicity, robustness, low maintenance, higher Torque / Ampere ratio, etc. One of the limited areas until a few years ago was the application of alternating current electrical machines in drives that require speed variation, mainly due to the impossibility of obtaining sources of alternating current of variable frequencies. Today, this problem has been overcome with the application of mathematical models and power electronics, generating possibilities of obtaining three-phase sources of voltage and variable frequencies. These sources solved the frequency variation problem, but the control systems are still very complex and present some problems that power electronics bring with them: harmonics, low power factor, loss of torque, etc. These problems with the passage of time have been improved, recently they have presented and will continue to present great advances, thanks to all the researchers who fight and study this fascinating area of Electrical Engineering.
Distributed Power Generation Systems (DPGSs) based on renewable energy sources are experiencing great development worldwide. In recent years, in many countries, issues such as the conservation of natural resources, protection of the environment and sustainability, have reached great importance. An area with great environmental problems is the generation of energy and there are many efforts that must be promoted in order to articulate a more hopeful future, in this sense, one of the most significant achievements is the development of new attitudes regarding rational use of energy and policies that promote the use of renewable energies to the maximum, also called green or clean energies, such as wind, solar, hydroelectric and biomass, which reduce the emissions of gases that cause global warming.
Due to the increasing number of DPGSs connected to the utility grid, new and more stringent standards have to be investigated in regards to power quality, safe operation and protection. As a consequence, the control of DPGSs must also be improved to meet network interconnection requirements. Increasing day-to-day demand for energy can create problems for energy distributors, such as grid instability and even outages. The need to produce more energy combined with the interest in clean technologies produces an increase in the development of energy distribution systems using renewable energies. Distributed Generation (DG) emerges as an important alternative for the provision of electric power service, since it can increase the reliability and security of the supply in the short, medium and long term."


Table of Contents

Electrical and Electronic Engineering

Comparative Analysis of Lattice-based All-Pass Filter and Second Order Generalized Integrator as Orthogonal System Generator of a PLL flash_logo_35
1 - 15
Study on Dynamic Characteristics of UHVDC System under Hierarchical Infeed Mode with STATCOM flash_logo_35
16 - 27
A Hybrid Protocol for SWIPT in Cooperative Networks flash_logo_35
28 - 41
New Control Approaches for Trajectory Tracking and Motion Planning of Unmanned Tracked Robot flash_logo_35
42 - 56
Hybrid Dynamic CML with Modified Current Source (H-MDyCML): A Low-Power Dynamic MCML Style flash_logo_35
57 - 65
Elicitation of Scattering Parameters of Dual-halo Dual-dielectric Triple-material Surrounding Gate (DH-DD-TM-SG) MOSFET for Microwave Frequency Applications flash_logo_35
66 - 73
Authentication & Integration Approaches for mHealth Apps from a Usability View flash_logo_35
74 - 89

Computer Science and Information Technology

Service Action Recognition in Power Supply Business Hall with 3D-Fused ConvNet flash_logo_35
90 - 99